Portable Shop Cabin
Size: 10 (L) X 10 (B) X 8.5 (H)
- The base frame shall be made of pressed mild steel channel section of C channel for outer frame ISMC and for cross section
- Strong grid pattern shall be provided by C section to avoid deflection
TOP FRAME & ROOF: The top frame shall be made using outer c channel, square pipe, angle, etc. Self-draining type of roof shall be provided by using plain GI sheets.
SIDE AND END WALLS: The side and end frame shall be made out of pressed sections of suitable profiles of sufficient strength. Steel sheet shall be continuously welded at the top and bottom of the entire structure to offer better strength to weight ratio. All gaps shall be sealed at edges, seams, bottom etc. to prevent ingress of moisture. Exterior wall shall be made up of GI specially corrugated sheets In office cabin, Interior wall is made from laminated sheet
PAINTS: Inside of cabin 1 coat of red oxide and outer side 1 coat red oxide with 2 coats of synthetic enamel paint.
INSULATION: 25 mm thick Thermocole insulation at side wall & 40 mm thick Thermocole insulation in celling
FLOORING SYSTEM:18 mm thick cement sheet with vinyl carpet
VENTILATION SYSTEM: 2 nos. of sliding window size of : 2' x 2' with safety grill and 1 no size of: 4'x3' aluminum open-able window and 1 no Exhaust Fan
DOOR:1 no size of : 3'x7' Door. The door frame shall be made out with aluminum powder coated frame and Door shall be insulated made from GI.
SHUTTER:Size: 4' x 3' Open able Shutter.
ELECTRICALS: All electric wiring shall be concealed with 2 LED lights and 1 no of cabin fan and 1 no of Wall Fan
PLATFORM: One platform size of :6' x 3'
Plot No. 193-A, G.I.D.C. Estate, Near Telephone Exchange, Nandesari, Vadodara Gujarat India +918037268414